What is a matrix inverter?

The matrix inverter is also known as the inverter that directly converts the AC input voltage to the AC output voltage.
In 2006, Yaskawa first introduced the world’s first matrix conversion control method, which helped this control method completely overcome the disadvantages of the traditional AC inverter series. The breakthrough development of this technology gave birth to the U1000 series of inverters.
This state-of-the-art motor-driven inverter is only available in Yaskawa and eliminates the problems of standard AC inverters.
With traditional technology, the input AC power is rectified to DC and then reversed back to the output AC source. This process generates harmonic currents that cause large losses and interfere with the system. At the same time, in the process of braking kinetic energy, it is necessary to have an additional discharger to the grid or a discharge resistor to burn off excess electricity.
With these distinctive features, when using the U1000 inverter, it helps to reduce the cost of external equipment. No braking unit, no input or output filter needed. This reduces costs and improves engine life.
The U1000 ranks first in the performance of the general-purpose inverters, further improving your facilities.
Biến tần ma trận U1000
What is matrix transformation?
A matrix converter is an AC/AC converter consisting of 9 bidirectional switches arranged in a matrix. It converts three-phase AC power directly from the required voltage and frequency.
image003
Difference between standard inverter and matrix inverter

For standard inverter

image005

Power supply -> rectifier circuit -> DC converter circuit -> power converter circuit -> motor
For matrix inverter

image007

Power supply -> AC/AC converter circuit -> motor
(without main capacitor circuit)
(Special power module)
(reuse previously wasted electrical energy with a new way to save electricity)

image007image009

Low harmonics; power quality control

image013
Renew energy to save electricity
When a motor rotates it consumes energy, when a motor is pulled it produces energy.
We can save electrical energy by taking advantage of this renewable energy source instead of wasting it.
image015
Renewable energy
Elevators, cranes
When the load goes down gravity makes the motor rotate
image017
Vertical conveyors; cart
image019
Generators, windmills, watermills
image021
Efficient use of energy
Discharge resistors remove excess energy as heat, but you can regenerate it back into the power supply to save energy.

image023

You can save huge amount of energy
Examples of renewable energy saving efficiency
Use analog or communication signals to monitor energy saving processes

image025

With no surrounding equipment affecting, the input waveform is in sinusoidal form, similar to a commercial power supply, so harmonics will be improved for surrounding machinery.
The capacity of the electrical system is increased, and the harmonic regulations are also met.
Comparison between AC inverter without REACTOR filter, inverter with REACTOR filter and inverter that matches U1000.

image027

– Reduced power supply
The power factor is high so you can choose a lower power supply capacity.
You can shrink the conductor size, reduce the generator power. And Don’t worry about being fined because of harmonic problems
– All-in-one integration

image028

The previous harmonic countermeasures required the connection of a converter: such as the input filter (in put REACTOR), harmonic filter, and capacitor were not needed.

image030

– Torque characteristic
Maximum torque at 0Hz, without an encoder motor when out of range of the inverter. Yaskawa offers advanced control features without the need for a rotary encoder. Get even stronger speeds for IPM motor connections.
– For asynchronous motor (synchronous motor)
In control mode Advanced Open Loop Vector Control for PM achieves 200% of torque at 0 rpm.
881
17/05/2021

Exchange content about products