KCLY KOC680 Series Inverter Monitor Quick Learn.

To help you manipulate the inverter parameter settings in the most convenient and fastest way, of course, before using, we should carefully read the user manual (catalog/manual) of that product. One of them is indispensable to learn about the inverter screen (keypad). From the layout, how many keys, how many LEDs are displayed, the function of each key in each specific case.

Inverters of all brands say them, and KCLY’s inverters in particular have a certain rule of their own. That makes it difficult for you to get used to a new inverter brand, understand that we will make it simple for you to approach in the easiest way.

To help you get acquainted with the fastest and simplest KCLY KOC680 inverter display. We firmly believe that when you read attentively, you can fully understand the use of the entire inverter display once.

EXPLAINING KEYS, SIGNS

Describe the LEDs on the display.

Led “RUN”: This LED lights up when the inverter has a run command or is running. This LED turns off when the inverter is in stop state.

Led “LOCAL”: This LED is off to indicate the status of keyboard control, this LED is continuously lit to indicate the terminal control status, This LED blinks to indicate the remote control status.

Led “DIR”: This LED lights up means it is running in the forward direction.

Led “TRIP”: Displays in the modes “Tunning, torque control mode, fault signal”

When it is on continuously, it is in “torque control mode”.

When it flashes slowly, it is in “tuning mode”.

When it flashes quickly, it is in “error”

Led “HZ, A, V”: Indicates frequency, current and voltage

Description of the on-screen keys

Button	Name	Function
PRG/ESC	Programming	Enter or exit “Access Level 1”
DATA/ENTER	Confirmation	Enter access levels or to confirm (save parameters) change settings
Δ	Increment	Up key
∇	Decrement	Down key
	Shift	Switch key when pressed to monitor parameter or to change digit when selecting parameter setting
Run	Run	Inverter start key
Stop/Reset	Stop/Reset	Stop/Reset This key to stop the inverter when running or to reset the fault when in the fault state
MF.K	Multi-function	Perform alternate function based on parameter b9-01
QUICK (PRG+DATA)	Menu mode selection	QUICK (PRG+DATA) Menu mode selection Alternate between the modes of parameter A0-08 This key depends on the new option.

PRACTICAL EXPERIENCE

Basically, getting used to the inverter screen of any brand is not difficult. For those of you who are new to inverters, you should read carefully before practicing. As for those of you who have experience in installing many different types of inverters, it is not difficult for you to grope, after a while, you can understand the rules and functions of each key.

With the above article, we hope to help you quickly access the KCLY inverter display. Good luck!

If you have any questions related to KCLY inverters, please contact us so that our team of specialized engineers can answer, advise and solve problems with you.

Contact now Hotline 0978.705.050 so we can help you!